West Shore Regional Water Treatment Plant

West Shore Regional Water Treatment Plant was designed to raise the bar on operational excellence with state-of-the-art technology that included an epoxy lining system from Tnemec that protects secondary containment walls from chemical attack. “This was a new plant, which has several rooms containing tanks for storing chemicals such as chlorine,” according to Tnemec coating consultant Lee Zeigler. “The engineer in charge of the project needed a chemical-resistant coating to protect the concrete containment around these tanks from accidental leaks or spills.”

The project required a combination of novolac epoxies used for protecting concrete against acids, alkalis and other aggressive chemical solutions. After dry-abrasive blast cleaning in accordance with SSPC-SP13/NACE No. 6, ICRI-CSP5, the concrete was leveled with Series 218 MortarClad, an epoxy-modified cementitious resurfacer, which was trowel-applied at 1/16” thickness. The epoxy-polymer modification allows MortarClad to be applied as an overlay material, while increasing its density to make the mortar less susceptible to outgassing when topcoated.

The applicator then primed with Series 201 Epoxoprime, a 100% solids penetrating polyamine epoxy, followed by a spray-applied coat of Series 275 Stranlok, a 100 percent solids fiberglass-reinforced novolac epoxy. A topcoat of Series 282 Tneme-Glaze, a chemical-resistant glaze coating for additional protection, completed the lining system. “Both Stranlok and Tneme-Glaze are novolac epoxies, which means they are very chemical resistant,” Zeigler noted.

Interior concrete masonry unit (CMU) surfaces at the plant were cleaned in accordance with SSPC-SP13/NACE No. 6 and filled with Series 130 Envirofill, a waterborne cementitious acrylic, followed by two coats of Series N69F Hi-Build Epoxoline II, a polyamidoamine epoxy. Concrete block was also filled with Series 130 Envirofill, followed by a coat of Hi-Build Epoxoline II.

“Gannett Fleming has been specifying Tnemec coatings for years,” Zeigler added. “They are familiar with the performance characteristics of these coating systems, which have performed well in numerous water treatment projects in Pennsylvania.”

The West Shore Regional Water Treatment Facility was completed in the spring of 2006. The $36 million state-of-the-art facility is capable of producing 12 million gallons of water a day (MGD). The plant features a Supervisory Control And Data Acquisition (SCADA) system, which allows plant operators to monitor information on plant operations and control them from a centralized location, including chemical feed systems and water quality.

    Project Information

    Location
    New Cumberland, PA

    Completion
    June 2006

    Owner
    Pennsylvania American Water

    Field Applicator
    Thomas Burleigh Painting, Horsham, PA

    Engineer
    Gannett Fleming, Camp Hill, PA

    Printer Friendly Version

    PP_West_Shore_Plant

    Contact Your Rep

    Looking for Some Local Coatings Guidance?

    Reach out to one of our knowledgable and reliable representatives near you.

    Color Requests

    Searching for the Right Color?

    Use our color tool or request more tools from your local representative.

    Tank3D

    Create your Own Tank Design

    Use Tnemec's interactive water tank design program, Tank 3D.

    Continue Exploring in the color tool

    Close

    Color Swatch packet

    You can use our Color Tool page to explore our available colors and request swatches of colors you like.

    Sorry, there is a maximum of 6 color swatches.

    Request swatch packet

    Continue Exploring in the color tool

    Close