Wahoo Water Tank

After residents of Wahoo, Nebraska, decided to wrap their 118-foot water tower in a dramatic design featuring Old Glory, the project became a source of community pride, which is one reason the project’s engineer insisted on using a protective coating system from Tnemec. “The old coating was in bad shape,” recalled Tnemec coating consultant Ken Efferding. “The white coating was cracking, there was a considerable amount of rust and excessive mildew on the tank.”

The exterior was blasted down to bare metal in accordance with SSPC-SP6/NACE No. 3 Commercial Blast Cleaning, followed by an application of Series 90-97 Tneme-Zinc, a moisture-cured, zinc-rich urethane primer. An intermediate coat of Series 161 Tneme-Fascure, a polyamide epoxy, was applied for its corrosion protection, followed by a topcoat of Series 1074U Endura-Shield II, an aliphatic acrylic polyurethane, that resists degradation caused by ultraviolet (UV) light. All of the coatings were applied using brush and roller.

The recoating project was started in the fall of 2007 when the exterior was sandblasted and prepared for painting. The following spring, work resumed when the tank was pressure washed and the artist started work on the detailed graphics depicting the American flag wrapped around the tower. Using patterns for the lettering and flag design, the artist worked from a basket crane and outlined the design by hand with a pencil.

Transferring the artwork from a sketch to the water tank involved converting the drawing from inches to feet. Stars in the flag are more than two feet in diameter and lettering on the dome is ten-feet tall. More than a week was required to lay out the design, followed by another four days of actual painting.

The flag design was selected by Wahoo residents in a survey conducted by Wahoo Utilities in 2007. “They had all of the designs on display at the city office,” Efferding added. “Designs ranged from a giant light bulb to the flag. This design was pretty special.”

Constructed in 1975, the Wahoo water tank was designed by JEO Consulting Group, Inc., which planned and oversaw the recoating project. The graphic design was oriented to be clearly visible from a highway bypass planned for construction. The tank was also featured

    Project Information

    Location
    Wahoo, NE

    Completion
    June 2007

    Owner
    Wahoo, NE

    Engineer
    JEO Consulting Group, Inc., Wahoo, NE

    Field Applicator
    Utility Service, Perry, GA

    Printer Friendly Version

    PP_Wahoo_Water_Tank_Profile

    Contact Your Rep

    Looking for Some Local Coatings Guidance?

    Reach out to one of our knowledgable and reliable representatives near you.

    Color Requests

    Searching for the Right Color?

    Use our color tool or request more tools from your local representative.

    Tank3D

    Create your Own Tank Design

    Use Tnemec's interactive water tank design program, Tank 3D.

    Continue Exploring in the color tool

    Close

    Color Swatch packet

    You can use our Color Tool page to explore our available colors and request swatches of colors you like.

    Sorry, there is a maximum of 6 color swatches.

    Request swatch packet

    Continue Exploring in the color tool

    Close