Townsend Composite Elevated Tank

At first glance, the composite elevated tank (CET) in Townsend, Ontario, appeared to be an all-welded steel tank supported by a reinforced concrete pedestal, but as Tnemec coating consultant David Walker discovered, looks can be deceiving. “It’s a unique design that has the steel tank sitting on a concrete column that extended through the center of the tank,” Walker explained. “The steel tank is like a circular tire with the concrete column inside it.”

After a thorough assessment of the CET that included adhesion testing, Walker determined the internal and external coating systems were failing. He recommended removal and replacement of the existing coatings with high-performance primers and topcoats. The specification included nearly 800 gallons of Series 406 Elasto-Shield, an aromatic polyurethane hybrid lining for both concrete and steel in immersion service. “Tnemec is unique for having primers that are NSF approved for use under Elasto-Shield,” Walker noted. “Because of the Elasto-Shield technology, we were able to provide different thicknesses while adhering to the NSF requirements for steel and concrete.”

Interior concrete was brush blasted and resurfaced using Series 218 MortarClad, an epoxy modified cementitious mortar that was applied with a stucco sprayer at 1/8-inch dry film thickness (DFT). Series 1 Omnithane, a modified aromatic polyurethane primer, was applied using an airless sprayer. Plural component equipment was then used to apply the Elasto-Shield finish coat at 40.0 mils DFT.

Interior steel was prepared in accordance with SSPC-SP10/NACE No. 2 Near-White Metal Blast Cleaning, primed with Series 91-H2O Hydro-Zinc, a moisture-cured, zinc-rich urethane that was spray-applied, and topcoated with Elasto-Shield applied at 30 mils DFT. Both Hydro-Zinc and Omnithane primers are ANSI/NSF Standard 61 certified for use with Elasto-Shield in potable water applications.

The tank’s exterior was prepared in accordance with SSPC-SP6/NACE No. 3 Commercial Blast Cleaning under a containment system so dust could be collected. Exterior steel was primed with Hydro-Zinc, followed by an intermediate coat of Series N69F Hi-Build Epoxoline II, an advanced generation polyamidoamine epoxy for the protection of steel and concrete. The exterior topcoat was Series 73 Endura-Shield, an aliphatic acrylic polyurethane that is highly resistant to abrasion and exterior weathering. Overall, more than 1,300 gallons of coatings were required to complete the project.

    Project Information

    Location
    Townsend, Ontario

    Completion
    October 2007

    Owner
    Haldimand County, Ontario, Canada

    Engineer
    Ontario Clean Water Agency, Toronto, Ontario

    Field Applicator
    JDCMI, Cambridge, Ontario

    Printer Friendly Version

    PP_Townsend_Composite_Tank_Profile

    Contact Your Rep

    Looking for Some Local Coatings Guidance?

    Reach out to one of our knowledgable and reliable representatives near you.

    Color Requests

    Searching for the Right Color?

    Use our color tool or request more tools from your local representative.

    Tank3D

    Create your Own Tank Design

    Use Tnemec's interactive water tank design program, Tank 3D.

    Continue Exploring in the color tool

    Close

    Color Swatch packet

    You can use our Color Tool page to explore our available colors and request swatches of colors you like.

    Sorry, there is a maximum of 6 color swatches.

    Request swatch packet

    Continue Exploring in the color tool

    Close