Dal-Tile Manufacturing Plant Wastewater Piping

With a price tag of $180 million, the Dal-Tile ceramic tile plant and distribution center in Dickson, Tennessee, is a showcase for advanced technology, including Tnemec’s ceramic-modified epoxy lining used to protect ductile iron pipe (DIP) from corrosion.

“The protective lining was chosen for its hydrogen sulfide gas (H2S) and industrial chemical resistance,” explained coating consultant Mark Goulet, Tnemec Representative, NexGen Coating Resources. “The lining was shop-applied to 735-feet of 12-inch diameter DIP and arrived at the jobsite ready to go.”

The pipe is part of the infrastructure to handle wastewater generated during manufacturing. Sections of pipe located on the site of the plant were the responsibility of Dal-Tile contractors, while off-site portions were under the jurisdiction of the municipal utility in Dickson.

Both the municipal and private sections of pipe were lined with Series 431 PermaShield PL, a 100 percent solids, high-build modified polyamine epoxy liner developed by Tnemec for the unique needs of steel and ductile iron pipe and fittings used to transport wastewater. The interior of the pipe was prepared and coated by Consolidated Pipe & Supply Company, Inc., at its steel fabrication shop in Bessemer, Alabama.

The interior of the DIP was prepared in accordance with NAPF 500-03-04: Abrasive Blast Cleaning of Ductile Iron Pipe. After preparation, Series 431 was spray-applied using plural component (PC) equipment at 40 mils dry film thickness (DFT) to provide a barrier against wastewater and gases that can corrode sewer pipes.

Series 431 contains high-quality, ceramic microspheres (20 percent by volume), which add exceptional abrasion resistance to an already durable epoxy film. Its light green color also facilitates visual inspection of DIP using lamping, camera and closed-circuit television.

Located 30 minutes west of Nashville, the 1.4-million-square-foot manufacturing facility and distribution center is located on 184 acres in Dickson County Industrial Park. A Dallas-based division of Mohawk Industries, Dal-Tile is the largest manufacturer and marketer of ceramic tile and natural stone products used in residential and commercial design and construction across North America.

    Project Information

    Completion
    December 2015

    Engineer/Architect
    James + Associates, Inc. of Nashville, Tennessee

    Shop Applicator
    Consolidated Pipe & Supply Co., Bessemer, Alabama

    Location
    Dickson, Tennessee

    Owner
    Dickson County, Tennesee

    Printer Friendly Version

    PP_Dal-TIle_Manufacturing_Profile

    Contact Your Rep

    Looking for Some Local Coatings Guidance?

    Reach out to one of our knowledgable and reliable representatives near you.

    How to Purchase

    Ready to Order Tnemec?

    We're ready to help. Click below to learn more about our purchasing process.

    Sustainable Building

    Need Coatings for LEED Projects?

    Tnemec offers a long list of low VOC coatings built to protect sustainable structures.

    Continue Exploring in the color tool

    Close

    Color Swatch packet

    You can use our Color Tool page to explore our available colors and request swatches of colors you like.

    Sorry, there is a maximum of 6 color swatches.

    Request swatch packet

    Continue Exploring in the color tool

    Close