Series V701
HydroFlon
Generic Type
Advanced Thermoset Solution Fluoropolymer
Common Usage
A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.
Special Qualifications
Series V701 was tested in accordance with, and passed, the California Dept. of Public Health (CDPH) Standard Method v1.2 and meets the requirements of LEED v4.1 Low-Emitting Materials, Collaborative for High Performance Schools-Paints & Coatings, Living Building Challenge Materials Petal 10, and WELL Building Standard v2 X06 VOC Restrictions.
View more product detailsProduct Data Sheets
- English_Series_V701_Hydroflon_pds.pdf
- French_Series_V701_Hydroflon_pds.pdf
- Spanish_Series_V701_Hydroflon_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 502 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
HAPS
Unthinned: 0.29 lbs/gal solids
Thinned 10% (No. 63 Thinner): 0.35 lbs/gal solids
Thinned 10% (No. 65 Thinner): 0.29 lbs/gal solids †
Primers
Series 1, 20, FC20, 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 91-H₂O, 94-H₂O, 118, 135, L140, L140F, N140, N140F, V140, V140F, 161, 1224. Note: Series 1 requires an intermediate coat prior to topcoating with Series V701. Note: Series 118 is typically used to overcoat, sound, existing coating systems. See product data sheet for more information.
Volume Solids
61.0 ± 2.0% (mixed) †
Intermediate
Series 73, 750, 1075, 1075U, 1095
Note: When topcoating with Series V701, the following maximum recoat times apply: Over 20, FC20, 27, 66, L69, L69F, N69, N69F, V69, V69F, 135, L140, L140F, N140, N140F, V140, V140F, 161, 14 days; over itself, 30 days; over 750, 1075, 1075U, 1095, 45 days; over 1, 60 days; over 27WB, 73, 90-97, H90-97, 91-H2O, 94-H2O, 1224, 90 days.
Volatile Organic Compounds
Unthinned: 1.11 lbs/gallon (133 grams/litre)
Unthinned: 0.55 lbs/gallon (66 grams/litre) (TBAc Exempt)
Thinned 10% (No. 63 Thinner): 1.77 lbs/gallon (213 grams/litre)
Thinned 10% (No. 63 Thinner): 1.35 lbs/gallon (161 grams/litre) (TBAc Exempt)
Thinned 10% (No. 65 Thinner): 1.87 lbs/gallon (224 grams/litre)
Thinned 10% (No. 65 Thinner): 0.55 lbs/gallon (66 grams/litre) (TBAc Exempt) †
Number of Components
Two: Part A and Part B
Finish
Semi-Gloss
Theoretical Coverage
878 mil sq ft/gal (24.0 m²/L at 25 microns) †
Curing Time
| Temperature | To Touch | To Handle | Minimum Recoat ‡ |
|---|---|---|---|
| 90°F (32°C) | 30 minutes | 4-6 hours | 6-8 hours |
| 70°F (21°C) | 30 minutes | 6-8 hours | 10-12 hours |
| 50°F (10°C) | 1 hour | 12-15 hours | 16-24 hours |
‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep