Series V69F
Hi-Build Epoxoline II
Generic Type
Polyamidoamine Epoxy
Common Usage
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used as a block filler on cementitious or masonry substrates.
View more product detailsProduct Data Sheets
- English_Series_V69F_Hi_Build_Epoxoline_Ii_pds.pdf
- French_Series_V69F_Hi_Build_Epoxoline_Ii_pds.pdf
- Spanish_Series_V69F_Hi_Build_Epoxoline_Ii_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 498 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Finish
Satin
Recommended DFT
2.0 to 10.0 mils (50 to 255 microns) per coat. Note: The number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Volume Solids
69.0 ± 2.0% (mixed) †
Primers
Steel: Self-priming or Series 1, 27, 27WB, 37H, 66, L69, L69F, N69, N69F, V69, 90E-92, 90G-1K97, 90-97, H90-97, 90-98, 91-H₂O, 94-H₂O, 135, 161, 394, 530
Galvanized Steel and Non-Ferrous Metal: Self-priming or Series 66, L69, L69F, N69, N69F, V69, 161
Concrete: Self-priming or Series 27WB, 130, 1254
CMU: Self-priming or Series 130, 1254
HAPS
Unthinned: 2.00 lbs/gal solids
Thinned 3.5% (No. 4 Thinner): 2.20 lbs/gal solids
Volatile Organic Compounds
Unthinned: 1.90 lbs/gallon (228 grams/litre)
Thinned 3.5% (No. 4 Thinner): 2.08 lbs/gallon (250 grams/litre) †
Topcoats
Series 22, 27WB, 30, 46H-413, 66, L69, L69F, N69, N69F, V69, V69F, 72, 73, 104, 113, 114, 118, 141, 156, 157, 161, 180, 181, 287, 446, 740, 750, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075, 1075U, 1077, 1078, 1078V, 1080, 1081, 1094, 1095, 1096, 1224. Note: The following recoat times apply for Series V69F: Immersion Service—Surface must be scarified after 30 days. Atmospheric Service—After 30 days, scarification or an epoxy tie-coat is required. When topcoating with Series 740 or 750, recoat time for V69F is 14 days. Contact your Tnemec representative for specific recommendations.
Theoretical Coverage
1,107 mil sq ft/gal (27.2 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components
Two: Part A (amine) and Part B (epoxy) — One (Part A) to one (Part B) by volume.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep