Series V290

CRU

Generic Type

Aliphatic Polyester Polyurethane

Common Usage

Extremely hard, chemical-resistant urethane coating with excellent abrasion resistance, wash-down conditions, corrosive fumes, and chemical contact.

View more product details

Curing Time

Temperature Min. Recoat To Service Chemical Resistance
75°F (24°C) 12 hours 24 hours 7 days

Curing time varies with surface temperature, air movement, humidity, and film thickness.

Primers

Steel: Series 27, 27WB, 66, L69, L69F, N69, N69F, 90-97, 90-1K97, 104, 135, L140, L140F, N140, N140F, 161, 280FC.
Concrete: Series 27WB, 66, L69, L69F, N69, N69F, 104, 161, 201, 205, 237, 238, 280, 280FC, 281, 287.

Intermediate

Series 27, 27WB, 66, L69, L69F, N69, N69F, 104, 135, L140, L140F, N140, N140F, 161, 205, 210, 222, 233, 237, 237SC, 238, 239, 239SC, 270, 273, 280, 280FC, 281, 282, 287.
Note: The maximum recoat time for Series 27WB, 210, 222, 233, 237, 238, 280, 280FC, 281, and 282 is 24 hours. Refer to those product data sheets. Inorganic zinc-rich primers require an epoxy intermediate coat. Note: Before topcoating with Series V290, any Tnemec epoxy exterior exposed for more than three weeks must be scarified or reprimed with itself. Note: Scarification using a power sander and 100 grit sandpaper, No. 60 mesh sanding screen or a coarse stripping pad is required if topcoating Series V290 with itself. Mechanically abrading or power-sanding is the preferred method of scarification. Note: Common practice is to thoroughly scarify smooth, glossy surfaces prior to applying Series V290. Note: When applying Series V290 over a broadcast or mortar system, an epoxy grout coat is required.

Volume Solids

67 ± 2.0% (mixed) †

Theoretical Coverage

1,075 mil sq ft/gal (26.4 m²/L at 25 microns). See APPLICATION for coverage rates. †

Volatile Organic Compounds

Unthinned: 2.01 lbs/gallon (241 grams/litre).
Thinned 20% (No. 49 Thinner): 2.01 lbs/gallon (241 grams/litre) †

Finish

Semi-Gloss

HAPS

Unthinned: 0.019 lbs/gal solids
Thinned 20% (No. 49 Thinner): 0.019 lbs/gal solids

Recommended DFT

2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats will vary depending on substrate (surface) and other variables. Contact your Tnemec representative.

Number of Components

Two: Part A and Part B (2.5 Parts A to 1 Part B by volume)

Still have questions? Request the information you’re looking for:

Request Info

How to Purchase

Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep

Continue Exploring in the color tool

Close

Color Swatch packet

You can use our Color Tool page to explore our available colors and request swatches of colors you like.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close