Series L140
Pota-Pox Plus
Generic Type
Polyamidoamine Epoxy
Common Usage
Innovative, low VOC potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, and fittings in potable water service.
Special Qualifications
Certified by NSF International in accordance with NSF/ANSI/CAN Std. 61 and the extraction requirements of NSF/ANSI/CAN 600. Reference Tnemec’s certified product listing at www.nsf.org for additional details.
View more product detailsProduct Data Sheets
- English_Series_L140_Pota_Pox_Plus_pds.pdf
- French_Series_L140_Pota_Pox_Plus_pds.pdf
- Spanish_Series_L140_Pota_Pox_Plus_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
HAPS
Unthinned: 0.1 lbs/gal solids
Thinned 5% (No. 49 Thinner): 0.1 lbs/gal solids
Theoretical Coverage
1,043 mil sq ft/gal (25.6 m²/L at 25 microns). See APPLICATION for coverage rates. †
Topcoats
Interior: Series 21, 22, FC22, L140, L140F, N140, N140F
Exterior: Series 27, 66, L69, L69F, N69, N69F, V69, V69F, 73, 118, L140, L140F, N140, N140F, 156, 157, 161, 180, 181, 700, V700, 701, V701, 1026, 1028, 1029, 1078, 1078V, 1080, 1081, 1094, 1095, 1096, 1224. Note: When topcoating with Series 700, V700, 701, or V701, an intermediate coat of Series 73, 1095 or 1096 is required. Note: The following maximum recoat times apply; Series 1094, 1095, 21 days. Note: The following recoat times apply for Series L140: Immersion Service—Surface must be scarified after 60 days. Atmospheric Service—After 60 days, scarification or an epoxy tie-coat is required. Contact your Tnemec representative for specific recommendations.
Volatile Organic Compounds
Unthinned: 0.77 lbs/gallon (92 grams/litre) (TBAc exempt)
Unthinned: 1.03 lbs/gallon (123 grams/litre)
Thinned 5% (No. 49 Thinner): 0.77 lbs/gallon (92 grams/litre) (TBAc exempt)
Thinned 5% (No. 49 Thinner): 1.03 lbs/gallon (123 grams/litre) †
Number of Components
Two: Part A (amine) and Part B (epoxy) — One (Part A) to one (Part B) by volume.
Recommended DFT
2.0 to 10.0 mils (50 to 255 microns) per coat. Note: Reference the NSF website at www.nsf.org for details on the maximum allowable DFT. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Volume Solids
65.0 ± 2.0% (mixed) †
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep