Series 971
Aerolon Acrylic
Generic Type
Fluid-applied acrylic insulation coating
Common Usage
An innovative, fluid-applied, thermal insulating coating utilizing aerogel particles that imparts exceptional insulative properties to a variety of substrates. Ideal for insulating pipes, valves, tanks, structural steel, or other substrates where thermal improvement or personnel protection is desired. Part of a durable, corrosion-resistant coating system that bonds to the substrate, greatly reducing the issues associated with corrosion under insulation (CUI) and mitigating thermal bridging by controlling condensation.
Special Qualifications
Thermal Conductivity (ASTM C518 at 77°F): 0.0356 W/m-°K or 0.2468 BTU-in/ft²-hr-°F (R value at one inch equals 4.1)
Flame Spread (ASTM E84): Class A
Smoke Developed (ASTM E84): Class A
Tested in accordance with NORSOK M-501/ISO 20340
Series 971 meets the requirements of LEED-Low-Emitting Materials, Collaborative for High Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.
View more product detailsProduct Data Sheets
- English_Series_971_Aerolon_Acrylic_pds.pdf
- French_Series_971_Aerolon_Acrylic_pds.pdf
- Spanish_Series_971_Aerolon_Acrylic_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- 1278 Insulation Yellow
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Volatile Organic Compounds
0.016 lb/gallon (1.9 grams/litre) †
Finish
Matte
Theoretical Coverage
1,219 mil sq ft/gal (30.0 m²/L at 25 microns). See APPLICATION for coverage rates. †
Volume Solids
76 ± 2.0% (practical) †
Curing Time
| Temperature | To Touch | To Handle | To Recoat† | To Topcoat |
|---|---|---|---|---|
| 95°F (35°C) | 45 minutes | 8 hours | 9 hours | 12 hours |
| 75°F (24°C) | 2 hours | 16 hours | 18 hours | 24 hours |
| 45°F (7°C) | 4 hours | 24 hours | 28 hours | 36 hours |
†Recoat times listed are with itself. Curing time varies with surface temperature, air movement, humidity and film thickness.
Primers
Steel: Series 1, 90E-92, 90-97, 90G-1K97, 90-98, 91-H₂O, 94-H₂O, 115, 118, 135, 394, 1220, 1224. Note: The use of zinc-rich primers is not generally recommended when in-service temperatures exceed 120°F (49°C). Reference NACE SP0198 for more information.
Galvanized Steel and Non-Ferrous Metal: Series 115, 1224
Concrete: Series 154, 1220, 1224
CMU: Series 1224
Note: Refer to appropriate primer data sheet for maximum temperature resistance.
Topcoats
Series 22, 27WB, 72T, 115, 154, 1028T, 1094, 1095, 1096, 1224. Other topcoats may be available, contact your Tnemec representative for more information. Note: A cure time of 24 hours at 75°F (24°C) is required before topcoating Series 971. Extended cure time may be required at lower temperatures.
Recommended DFT
30.0 to 50.0 mils (762 to 1270 microns) per coat. Note: For use as a thermal break, recommended total dry film thickness is 80 to 100 mils (2032 to 2540 microns). Thickness may vary by project. Note: Multiple coats may be required, please contact your Tnemec Representative for film thickness recommendations.
HAPS
0 lb/gal solids
Number of Components
One
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep