Series 90-1K97

Tneme-Zinc

This product has been discontinued. Please contact your local sales representative for further assistance.

Generic Type

Aromatic Polyurethane, Zinc-Rich

Common Usage

An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic zinc coating.

Special Qualifications

90-1K97 Tneme-Zinc uses a dust which meets the requirements of ASTM D 520 Type III and contains less than .002% lead. This level qualifies it to be classed as "non-lead" (less than 0.06% lead by weight) as defined in Part 1303 of the Consumer Product Safety Act Regulations. Conforms to SSPC Paint 20, Type II.

Curing Time

Temperature † To Handle To Recoat
75°F (24°C) 2 hours 8 hours
55°F (11°C) 4 hours 12 hours
35°F (2°C) 6 hours 16 hours

† 50% relative humidity. Curing time varies with surface temperature, air movement, humidity and film thickness. Ventilation: When used in enclosed areas, provide adequate ventilation during application and cure. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator (see separate product data sheet.)

Volume Solids

62.0 ± 2.0%

Intermediate

Series 115. Intermediate coat color should be noticeably different but in the same family as the topcoat color. Certain intermediate/topcaot systems may require multiple coats to achieve acceptable hiding, depending on color, specified thickness per coat and method of application. More information appears under Application Equipment.

Theoretical Coverage

996 mil sq ft/gal (24.4 m²/L at 25 microns). See APPLICATION for coverage rates.

Number of Components

One

Topcoats

Series 6, 27, 46H-413, 66, N69, N69F, 73, 84, 104, 113, 114, 161, 290, 291, 1070, 1071, 1072, 1074, 1075, 1077, 1078. Note: Certain topcoat colors may not provide one-coat hiding depending on method of application. contact your Tnemec representative.

HAPS

Unthinned: 4.19 lbs/gal solids
Thinned 2.5%: 4.48 lbs/gal solids (No. 2 Thinner); 4.18 lbs/gal solids (No. 3 Thinner)
Thinned 10%: 5.33 lbs/gal solids (No. 2 Thinner); 4.23 lbs/gal solids (No. 3 Thinner)

Colors

Reddish-Gray

Recommended DFT

2.5 to 3.5 mils (65 to 90 microns) per coat.

Volatile Organic Compounds

Unthinned: 2.66 lbs/gallon (318 grams/litre)
Thinned 2.5%: 2.77 lbs/gallon (332 grams/litre)
Thinned 10%: 3.08 lbs/gallon (369 grams/litre)

Continue Exploring in the color tool

Close

Color Swatch packet

You can use our Color Tool page to explore our available colors and request swatches of colors you like.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close