Series 701
HydroFlon
Generic Type
Advanced Thermoset Solution Fluoropolymer
Common Usage
An exterior finish coat especially designed for tanks and other exposed steel substrates. HydroFlon has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. Hydroflon’s ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.
View more product detailsProduct Data Sheets
- English_Series_701_Hydroflon_pds.pdf
- French_Series_701_Hydroflon_pds.pdf
- Spanish_Series_701_Hydroflon_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 502 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Theoretical Coverage
962 mil sq ft/gal (23.6 m²/L at 25 microns). †
Primers
Series 1, 20, FC20, 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 91-H₂O, 94-H₂O, 118, 135, L140, L140F, N140, N140F, V140, V140F, 161, 1224. Note: Series 1 requires an intermediate coat prior to topcoating with Series 701. Note: Series 118 is typically used to overcoat, sound, existing coating systems. See product data sheet for more information.
Curing Time
Temperature | To Touch | To Handle | Minimum Recoat ‡ |
---|---|---|---|
90°F (32°C) | 30 minutes | 4-6 hours | 6-8 hours |
70°F (21°C) | 30 minutes | 6-8 hours | 10-12 hours |
50°F (10°C) | 1 hour | 12-15 hours | 16-24 hours |
‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet.
Intermediate
Series 73, 750, 1075, 1075U, 1095.
Note: When topcoating with Series 701, the following maximum recoat times apply: Over 20, FC20, 27, 66, L69, L69F, N69, N69F, V69, V69F, 135, L140, L140F, N140, N140F, V140, V140F, 161, 14 days; over itself, 30 days; Over 750, 1075, 1075U, 1095, 45 days; over 1, 60 days; over 27WB, 73, 90-97, H90-97, 91-H2O, 94-H2O, 1224, 90 days.
Volume Solids
60.0 ± 2.0% (mixed) †
Volatile Organic Compounds
EPA Method 24 †
Unthinned: 2.62 lbs/gallon (314 grams/litre)
Thinned 5% (No. 63 Thinner): 2.82 lbs/gallon (338 grams/litre)
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Number of Components
Two: Part A and Part B
Finish
Semi-gloss
HAPS
Unthinned: 3.94 lbs/gal solids
Unthinned 5% (No. 63 Thinner): 3.94 lbs/gal solids
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep