Series 66HS
Hi-Build Epoxoline
Product is made to order for specific projects. Contact your Tnemec Representative for additional information.
Generic Type
Polyamide Epoxy
Common Usage
A high-solids, low VOC, pure polyamide epoxy that offers exceptional protection to a variety of substrates in atmospheric and immersion environments. Applied as a primer, intermediate, or topcoat, this versatile coating also accepts a wide-range of finish coats, allowing for a coating system tailored to specific exposure conditions.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 518 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Volume Solids
78% ± 2.0% (mixed) †
Finish
Satin
Primers
Steel: Self-priming or Series 1, 20HS, FC20HS, 27, 27WB, 90-97, 90-98, 90E-92, 90G-1K97, 91-H2O, 94-H2O, 394, V530, 161HS
Concrete: Self-priming, 20HS, FC20HS, 161HS
CMU: Self-priming, 130, 1254
Topcoats
46H-413, 27WB, 30, 66HS, 72, 73, 104, 113, 114, 115, 141, 161HS, 262, 265, 290, 291, 740, 750, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075, 1075U, 1080, 1081, 1095. Refer to COLORS on applicable topcoat data sheets for additional information. Note: When topcoating Series 66HS, the following maximum recoat times apply: with 262 or 265, 7 days; with 740 or 750, 21 days; with 1095, 30 days; with itself, 46H-413, 27WB, 104, 113, 114, 141, 161HS, 290, 291, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1080 or 1081, 60 days; with 72, 73, 1074, 1074U, 1075 or 1075U, 90 days. Scarify the Series 66HS surface before topcoating if maximum recoat time has elapsed.
Volatile Organic Compounds
Unthinned: 1.54 lbs/gallon (184 grams/litre)
Thinned 10% (No. 4 Thinner): 2.02 lbs/gallon (243 grams/litre)
Thinned 20% (No. 4 Thinner): 2.43 lbs/gallon (292 grams/litre)
Surfacer/Filler/Patcher
215, 217, 218
Recommended DFT
2.0 to 10.0 mils (50 to 254 microns) per coat.
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Curing Time
| Temperature | To Touch | To Handle | To Recoat | Immersion |
|---|---|---|---|---|
| 95°F (35°C) | 1 hour | 3 hours | 6-7 hours | 7 days |
| 75°F (24°C) | 2 hours | 8 hours | 12-16 hours | 7 days |
| 55°F (13°C) | 4 hours | 22-24 hours | 30-34 hours | 12-14 days |
Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low temperature applications, add No. 44-705 Epoxy Accelerator, see separate product data sheet for cure information.
Ventilation: When used as a tank lining or in enclosed areas, provide adequate ventilation during application and cure.
Theoretical Coverage
1,249 mil sq ft/gal (30.7 m²/L at 25 microns). See APPLICATION for coverage rates. †
HAPS
Unthinned: 1.17 lbs/gal solids
Thinned 10% (No. 4 Thinner): 1.88 lbs/gal solids
Thinned 20% (No. 4 Thinner): 2.60 lbs/gal solids
Number of Components
Two: Part A (epoxy) and Part B (polyamide)
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep