Series 632

Prime-A-Pell H2O Concentrate

This product has been discontinued. Please refer to Series 633 | Prime-A-Pell H2O for a suitable alternative, or contact your Tnemec Sales Representative

Generic Type

Siloxane/Silane Blend

Common Usage

Prime-A-Pell H2O Concentrate is a concentrated water-based water repellent requiring dilution at the job site. Upon dilution, Prime-A-Pell H2O Concentrate produces a clear, filmless, penetrating water-repellent treatment for virtually all above-grade, vertical concrete, stucco, precast, sandstone and brick and block masonry. Concrete, stone and masonry treated with diluted Prime-A-Pell H2O Concentrate resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.

Colors

Clear. Prime-A-Pell H2O is milky-white when applied but dries clear, leaving the aesthetic appearance of the substrate unchanged.

Topcoats

If color is desired, apply Series 617 Conformal Stain WB 12 to 36 hours after application of Series 632. Application of Series 617 outside of this time frame may compromise water-repellency and/or adhesion properties.

Curing Time

Protect treated surfaces from rain and lawn sprinklers for 6 to 8 hours. (Time to resist moisture is increased at lower temperatures.) Allow 7 to 14 days before evaluating performance.

Volatile Organic Compounds

1.8 lbs/gallon (211 grams/litre)

Continue Exploring in the color tool

Close

Color Swatch packet

You can use our Color Tool page to explore our available colors and request swatches of colors you like.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close