Series 607

Conformal Stain

This product has been discontinued. Please refer to Series 617 | Conformal Stain WB for a suitable alternative, or contact your Tnemec Sales Representative

Generic Type

Methylmethacrylate Acrylic/Hydrophobic Fumed Silica

Common Usage

Conformal Stain is a penetrating, solvent-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Conformal Stain exhibits excellent color stability and is designed not to peel or flake when applied to a properly prepared substrate.
Repels water when used on dense substrates.

Colors

Conformal Stain is available in 20 standard colors. Custom color matching is available. A semi-transparent finish may be achieved by blending Conformal Stain with Conformal Clear; this will allow exposed aggregate to remain visible while rendering color uniformity to the matrix. Please contact your Tnemec representative.

Volatile Organic Compounds

6.1 lbs/gallon (729 grams/litre) †

Curing Time

Series 607 is fully cured for light traffic bearing within 72 hours at 75°F (24°C). Application at temperatures lower than 40°F (4°C) may reduce coverage rates and inhibit curing. Protect treated surfaces from rain and lawn sprinklers for 72 hours. Allow the water-repellent pretreatment to cure 12 hours, then apply Series 607.

Volume Solids

19% †

Continue Exploring in the color tool

Close

Color Swatch packet

You can use our Color Tool page to explore our available colors and request swatches of colors you like.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close