Series 295
Clear CRU
This product has been discontinued. Please contact your local sales representative for further assistance.
Generic Type
Aliphatic Polyester Polyurethane
Common Usage
Extremely hard, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has superb flow characteristics, excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Gloss among the best of air dried finishes. Typically used over epoxy and urethane flooring systems for increased abrasion and chemical resistance. Contains a blend of ultraviolet (UV) light absorbers for enhanced gloss retention and resistance to UV degradation.
Volume Solids
62 ± 2.0% (mixed)
Theoretical Coverage
994 mil sq ft/gal (24.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
HAPS
Unthinned: 0.47 lbs/gal solids
Thinned 8%: 0.46 lbs/gal solids
Curing Time
| Temperature | Min Recoat | To Service | Chemical Resistance |
|---|---|---|---|
| 75°F (24°C) | 12 hours | 24 hours | 7 days |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Number of Components
Two: Part A and Part B (2.5 Parts A to 1 Part B by volume)
Intermediate
Series 205, 210, 222, 223, 224, 237, 238, 280, 281, 284, 285, 287, 290 and 291. Note: Scarification using a power sander and 100 grit sandpaper, No. 60 mesh sanding screen or a coarse stripping pad is required if topcoating Series 295 with itself. Note: When applying Series 295 over a broadcast or mortar system, an epoxy grout coat is required. Note: Because epoxies will chalk and discolor when exposed to ultraviolet light, exterior exposures require a pigmented urethane over epoxy coatings before the Series 295 may be applied.
Colors
Clear
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat.
Finish
Gloss
Volatile Organic Compounds
Unthinned: 2.86 lbs/gallon (343 grams/litre)
Thinned 8%: 3.12 lbs/gallon (373 grams/litre)