Series 290

CRU

Generic Type

Aliphatic Polyester Polyurethane

Common Usage

Extremely hard, chemical-resistant urethane coating for applications in commercial, industrial, and marine environments with excellent resistance to abrasion, washdown conditions, corrosive fumes and chemical contact. Gloss retention among the best of air dried finishes.

View more product details

Intermediate

Series 20, 27, 66, L69, L69F, N69, N69F, 104, L140, L140F, N140, N140F, 161, 205, 210, 237, 238, 270, 273, 280, 281, 282, 287. Note: Before topcoating with Series 290, any Tnemec epoxy exterior exposed for more than three weeks must be scarified or reprimed with itself. Mechanically abrading or power-sanding is the preferred method of scarification. The maximum recoat time for Series 210, 237, 238, 280, 281 and 282 is 24 hours. Refer to those product data sheets. Inorganic zinc-rich primers require an epoxy intermediate coat. Note: Scarification using a power sander and 100 grit sandpaper, No. 60 mesh sanding screen or a coarse stripping pad is required if topcoating Series 290 with itself. Note: When applying Series 290 over a broadcast or mortar system, an epoxy grout coat is required.

Volatile Organic Compounds

Unthinned: 2.41 lbs/gallon (288 grams/litre)
Thinned 10% (Max) (No. 39 Thinner): 2.76 lbs/gallon (330 grams/litre)
Thinned 10% (Max) (No. 42 Thinner): 2.80 lbs/gallon (335 grams/litre) †

Volume Solids

67 ± 2.0% (mixed) †

Finish

Semi-Gloss

HAPS

Unthinned: 0.16 lbs/gal solids
Thinned 10% (Max) (No. 39 Thinner): 0.16 lbs/gal solids
Thinned 10% (Max) (No. 42 Thinner): 0.16 lbs/gal solids

Recommended DFT

2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats will vary depending on substrate (surface) and other variables. Contact your Tnemec representative.

Primers

Steel: Series 20, 27, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, 90-1K97, 104, L140, L140F, N140, N140F, V140, V140F, 161, 205.
Concrete: Series 66, L69, L69F, N69, N69F, 104, 161, 201, 205, 208, 233, 237, 237SC, 238, 293SC, 280, 281, 287.

Theoretical Coverage

1,075 mil sq ft/gal (26.4 m²/L at 25 microns). See APPLICATION for coverage rates. †

Curing Time

Temperature Min. Recoat To Service Chemical Resistance
75°F (24°C) 12 hours 24 hours 7 days

Curing time varies with surface temperature, air movement, humidity and film thickness.

Number of Components

Two: Part A and Part B (2.5 Parts A to 1 Part B by volume)

Still have questions? Request the information you’re looking for:

Request Info

How to Purchase

Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep

Chemical Resistance

English_Series_290_Cru_cds.pdf

Continue Exploring in the color tool

Close

Color Swatch packet

You can use our Color Tool page to explore our available colors and request swatches of colors you like.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close