Series 27
F.C. Typoxy
Generic Type
Polyamide Epoxy
Common Usage
Versatile low-temperature coating ideally suited for steel fabrication and OEM applications. Also widely used as a field tie-coat. Provides fast curing and rapid handling capabilities.
View more product detailsProduct Data Sheets
- English_Series_27_Fc_Typoxy_pds.pdf
- French_Series_27_Fc_Typoxy_pds.pdf
- Spanish_Series_27_Fc_Typoxy_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 37 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Topcoats
Series 2H, 2HS, 30, 66, 73, 113, 114, 115, 700, V700, 701, V701, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1075, 1077, 1078, 1078V, 1094, 1095, 1096. Note: Series 27 exterior exposed for 21 days or longer requires an epoxy intermediate coat or scarification prior to topcoating with Series 2H or 2HS. When topcoating with Series 700, V700, 701, V701, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1078, or 1078V over Series 27, a 14 day maximum recoat time applies. When topcoating with Series 1094, 1095 or 1096 over Series 27, a 30 day maximum recoat time applies. Refer to appropriate topcoat data sheet for additional information.
Curing Time
Temperature | To Touch | To Handle | To Recoat |
---|---|---|---|
75°F (24°C) | 1/2 hour | 2 hours | 3 hours |
65°F (18°C) | 3/4 hour | 4 hours | 5-6 hours |
55°F (11°C) | 1 hour | 4-5 hours | 6-8 hours |
45°F (7°C) | 1-2 hours | 6-8 hours | 9-12 hours |
35°F (2°C) | 2-3 hours | 9-12 hours | 12-15 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Number of Components
Two: Part A and Part B
Finish
Flat
Volatile Organic Compounds
Unthinned: 2.36 lbs/gallon (282 grams/litre)
Thinned 10% (No. 60 Thinner): 2.83 lbs/gallon (339 grams/litre)
Thinned 10% (No. 4 Thinner): 2.83 lbs/gallon (339 grams/litre) †
Recommended DFT
2.0 to 6.0 mils (50 to 150 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Volume Solids
58.0 ± 2.0% (mixed) †
Theoretical Coverage
930 mil sq ft/gal (22.8 m²/L at 25 microns). See APPLICATION for coverage rates. †
HAPS
Unthinned: 2.59 lbs/gal solids
Thinned 10% (No. 60 Thinner): 2.59 lbs/gal solids
Thinned 10% (No. 4 Thinner): 3.54 lbs/gal solids
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep