Series 252SC
ChemBloc
Generic Type
Novolac Vinyl Ester
Common Usage
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.
View more product detailsProduct Data Sheets
- English_Series_252Sc_Chembloc_pds.pdf
- French_Series_252Sc_Chembloc_pds.pdf
- Spanish_Series_252Sc_Chembloc_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Topcoats
Series 252SC. Note: A saturant coat of 252SC liquids is required over fiberglass mat prior to application of topcoat. However, when Series 206SC flexible basecoat is used, then a 237SC or 239SC saturant coat is required.
Curing Time
Temperature | To Topcoat | Place in Service | Full Cure |
---|---|---|---|
75°F (24°C) | 6 to 72 hours | 24 hours | 72 hours |
If more than 72 hours have elapsed between coats, the ChemBloc coated surface must be mechanically abraded before topcoating. Note: A 24 hour cure provides for traffic, secondary containment and certain mild chemical exposures. Contact your Tnemec representative or Tnemec Technical Services.
Number of Components
Resin Containment Kit (RCK)–Two: Part A (base) and Part B (catalyst)
Mortar Containment Kit (MCK)–Three: Parts A (base), B (catalyst), and C (aggregate)
Volatile Organic Compounds
Unthinned: 0.2 lbs/gallon (23 grams/litre)
Recommended DFT
Resinous Basecoat: 6.0 to 12.0 mils (150-305 microns)
Mortar/Slurry Basecoat: 60 to 80 mils (1525 to 2030 microns)
Saturant: 8.0 to 24.0 mils (200-610 microns)
Topcoat: 4.0 to 12.0 mils (100-305 microns)
Base Coats
Series 252SC. (For a flexible basecoat option, refer to Series 206SC product data sheet.)
Volume Solids
Theoretical 89% (mixed). Series 252SC system contains a reactive monomer and some loss will occur during application and cure. Actual solids by volume will vary depending upon temperature and air movement. See Coverage Rates.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep