Series 244
Ultra-Tread M
Generic Type
Polyurethane Modified Concrete
Common Usage
Ultra-Tread M is a low odor, mortar applied floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread M is a self-priming mortar that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).
Special Qualifications
Formulated with antimicrobial properties. Does not support bacteria or fungal growth. Contact your Tnemec representative for specific test results.
Series 244 was tested in accordance with, and passed, the California Dept. of Public Health (CDPH) Standard Method v1.2 and meets the requirements of LEED v4.1 Low-Emitting Materials, Collaborative for High Performance Schools-Paints & Coatings, Living Building Challenge Materials Petal 10, and WELL Building Standard v2 X06 VOC Restrictions.
View more product detailsProduct Data Sheets
- English_Series_244_Ultra_Tread_M_pds.pdf
- French_Series_244_Ultra_Tread_M_pds.pdf
- Spanish_Series_244_Ultra_Tread_M_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- 00GR Gray
- 00RD Red
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Finish
Matte
Curing Time
| Temperature | Min. Recoat | Light Traffic | Place in Service † |
|---|---|---|---|
| 75°F (24°C) | 6 hours | 8 hours | 12 hours |
† For full resistance to chemicals and steam cleaning, 24 hour cure is needed.
Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low temperature applications, add No. 44-714 Ultra-Tread Accelerator, see separate product data sheet for cure information.
Topcoats
Series 244 is typically left as a stand-alone mortar without topcoating. If needed, use Series 222, 233, 237, 238, 239, 246, 252SC, 256, 257, 280, 280FC, 282. Note: These topcoats may only be used when recommended aggregate has been broadcast to refusal into the wet Series 244.
Recommended DFT
Suggested 1/4” to 3/8" (6mm to 9 mm).
Theoretical Coverage
21.0 - 17.0 sq ft per small kit
Volatile Organic Compounds
Parts A & B: 0.2 lbs/gallon (23 grams/litre)
Parts A, B & C: 0.05 lbs/gallon (6 grams/litre)
Primers
Self-priming
Number of Components
Three—Liquids: Part A & Part B, Aggregate: Part C
Surfacer/Filler/Patcher
Series 243, 244, 245 (extended with aggregate). Patching should be allowed to cure a minimum of six hours prior to placement of Series 244 to avoid blistering or doming of the Series 244. Series 215, or 201 mixed with fumed silica, may be used for small patches or crack repairs. Certain high-early strength, cementious repair mortars are also acceptable. Contact Tnemec for further qualifications.
Volume Solids
100% (mixed)
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep