Series 237
Power-Tread
Generic Type
Modified Polyamine Epoxy
Common Usage
A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
Special Qualifications
Series 237 meets the requirements of LEED-Low-Emitting Materials, Collaborative for High-Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.
View more product detailsProduct Data Sheets
- English_Series_237_Power_Tread_pds.pdf
- French_Series_237_Power_Tread_pds.pdf
- Spanish_Series_237_Power_Tread_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- 05BL Gainesboro
- 25BL Fountain Bleu
- 42BL Blue Channel
- 04BR Desert Sands
- 15BR Pale
- 68BR Twine
- 91GN Balsam
- 31GR Slate Gray
- 33GR Gray
- 35GR Black
- 46GR Sinker
- 28RD Monterrey Tile
- 02SF Lemon Yellow/Safety
- 17SF Candy Apple Red/Safety
- 00WH White
- Clear
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Finish
Gloss
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Surfacer/Filler/Patcher
Series 206, 215. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Recommended DFT
Primer: 6.0 to 12.0 (150 to 305 microns) per coat.
Broadcast: 1/16" to 1/8" (Double broadcast or slurry broadcast required to achieve 1/8")
Mortar: 3/16" to 1/4” (Minimum of 1/8”, Maximum of 1”)
Grout coat: 8.0 to 16.0 mils (205 to 405 microns)
Intermediate or Topcoat: 8.0 to 16.0 mils (205 to 405 microns)
Curing Time
Temperature | To Topcoat/Broadcast | To Place in Service |
---|---|---|
75°F (24°C) | 12 to 72 hours | 24 hours |
Note: If more than 72 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. Note: There is no maximum recoat time if aggregate has been broadcast to refusal into the preceding coat. Curing time varies with surface temperature, air movement, humidity and film thickness.
Topcoats
Series 233, 237, 238, 247, 248, 256, 257, 280, 280FC, 281, 282, N284, N285, 286, 287, V290, 296, 297. Note: If Series 247, 248, N285, 296, or 297 is selected for the finish coat, an intermediate coat of Series N284 is required. Note: Series 237 must be broadcast to refusal with silica sand, colored quartz, or flake prior to topcoating with Series 256 or 257.
Number of Components
Liquids–Two: Part A and Part B (2 parts A to 1 part B by volume)
Field Colorant–One: (optional) (Series 820)
Note: Aggregate for mortar applications (S237-0301C) is available from Tnemec or can be purchased from an approved supplier.
Volatile Organic Compounds
Unthinned: 0.21 lbs/gallon (25 grams/litre)
Thinned 5% (No. 2 Thinner): 0.58 lbs/gallon (70 grams/litre)
Volume Solids
100% (mixed)
HAPS
Unthinned: 0.07 lbs/gal solids
Thinned 5% (No. 2 Thinner): 0.37 lbs/gal solids
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep