Series 195
HullClad CU
Generic Type
Self-polishing, Tin-Free Antifouling Coating
Common Usage
An extended life, self-polishing, tin-free antifouling coating formulated to provide long-term protection against marine growth and organisms. Incorporates advanced hybrid fusion technology with hydrolysis compounds and a unique release controller that will provide long-lasting antifoul protection in the harshest marine environments. Typically used on the underwater hull of ships and other marine vessels. Formulated for up to sixty-month service life, dependent upon operational conditions and total DFT applied. Note: On immersion, Series 195 HullClad CU may exhibit a slight color change. For the expectations of performance from this antifouling product in static conditions, it is necessary to consider the environmental conditions i.e., traditional level of fouling activity, pollution levels, and water temperatures at static locations.
Special Qualifications
IMO Anti-fouling Systems Convention compliant (AFS/CONF/26) EPA Registration Number: 48302-15-55925
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Theoretical Coverage
1,075 per sq ft/gal (26.3 m²/L at 25 microns)
Intermediate
Series 191
Curing Time
| Temperature | To Touch | To Overcoat |
|---|---|---|
| 85°F (30°C) | 30 minutes min. | 4 hours min. |
| 50°F (10°C) | 2 hours min. | 8 hours min. |
| 35°F (2°C) | 5 hours min. | 16 hours min. |
† Two coat application. Note: The maximum time to launch is 6 months. Curing times listed above are for vessel speeds of less than 18 knots; for vessel speeds over 18 knots, contact your Tnemec Representative. For additional thickness curing times, please contact your Tnemec Representative. Curing time varies with surface temperature, air movement, humidity, and film thickness.
Recommended DFT
3.0 to 6.0 mils (75 to 150 microns) per coat. Thickness may vary by project.
Volatile Organic Compounds
2.47 lbs/gallon (269 grams/litre)
Volume Solids
67.0 ± 2.0% (practical) †
Number of Components
One
Finish
Matte
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep