Series 1418
Vinester
Generic Type
High Temperature Novolac Vinyl Ester
Common Usage
Resistant to very high temperature service and extremely corrosive environments, this coating is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as "neat" or non-pigmented. Series 1418 is the recommended selection for use in the most chemically demanding environments, such as, wet or dry FGD scrubbers, ductwork and slurry tanks operating in elevated temperature conditions. Use with specialty mortar powders, to embed glass mats, as a saturant coat or as a pigmented self-leveling finish coat. Series 1418 was formally ProPolymer 4847HT.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Primers
Self-priming on steel or Series 1402, 1407. Note: For services above 180°F (82°C), do not use a primer.
Finish
Semi-gloss
Number of Components
Two: Part A (base) and Part B (catalyst)
Curing Time
| Temperature | To Recoat | Immersion | Maximum Recoat |
|---|---|---|---|
| 90°F (32°C) | 3 hours | 24 hours | 3 days |
| 75°F (24°C) | 4 hours | 48 hours | 5 days |
| 60°F (16°C) | 12 hours | 4 days | 7 days |
Recoat times are typical for coating to be dry-to-touch and ready for the next application. Immersion and certain other services may require longer cure times and/or elevated temperature post cure for optimal performance. ASTM D2583 Barcol Hardness check is also recommended, minimum 40. Coating that has exceeded its maximum recoat time should be checked for styrene or acetone sensitivity or uniformly scarified to assure secondary bonding. Consult Tnemec Technical Services and Technical Bulletin 22-119.
Recommended DFT
Topcoat Application: 30.0 mils (760 microns)
Mortar Applications: +50.0 mils (+1270 microns)
Abrasion Resistant Applications: +50.0 mils (+1270 microns)
Volatile Organic Compounds
EPA Method 24
0.83 lbs/gallon (99 grams/litre)
Volume Solids
85.0 ± 2.0% (mixed). Series 1418 contains a reactive monomer and some loss will occur during application and cure. Actual solids by volume will vary depending upon temperature and air movement.
Surfacer/Filler/Patcher
Series 215, 217, N218, primer with 211-9111 or fumed silica. Note: Series N218 should be used for filling or patching small areas only. For areas in need of full resurfacing, select one of the other recommended products.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep
Support Documents
APP GUIDE_Series 1418 Vinester_150-Mil Glass Roving & Abrasion.pdf APP GUIDE Series 1418 Vinester 150 Mil Glass Roving Reinforced APP GUIDE_Series 1418 Vinester_90-Mil Glass Mat Reinforced.pdf APP GUIDE_Series 1418 Vinester_90-Mil Silica-Free Mortar.pdf APP GUIDE_Series 1418 Vinester_125-Mil Silica-Free Mortar Reinforced.pdf APP GUIDE Series 1418 Vinester 60 Mil Broadcast Vinester Color Card