Series 1415
Vinester
Generic Type
Epoxy Vinyl Ester
Common Usage
This corrosion resistant resin is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as “neat” or non-pigmented. A versatile selection for many secondary containments and process floors, Series 1415 is best for caustic and high-ph applications, and when used as the base material for silica-free systems. Use with specialty mortar powders, to embed glass mats, as a saturant coat or as a pigmented self-leveling finish coat. Series 1415 was formerly ProPolymer 4860.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Surfacer/Filler/Patcher
Series 215, 217, N218, primer with 211-9111 or fumed silica. Note: Series N218 should be used for filling or patching small areas only. For areas in need of full resurfacing, select one of the other recommended products.
Number of Components
Two: Part A (base) and Part B (catalyst)
Recommended DFT
Topcoat Application: 20.0-30.0 mils (510-760 microns)
Mortar Applications: +50.0 mils (+1270 microns)
Abrasion Resistant Applications: +50 mils (+1270 microns)
Curing Time
| Temperature | To Recoat | Immersion | Maximum Recoat |
|---|---|---|---|
| 90°F (32°C) | 3 hours | 24 hours | 3 days |
| 75°F (24°C) | 4 hours | 48 hours | 5 days |
| 60°F (16°C) | 12 hours | 4 days | 7 days |
Recoat times are typical for coating to be dry-to-touch and ready for the next application. Immersion and certain other services may require longer cure times and/or elevated temperature post cure for optimal performance. ASTM D2583 Barcol Hardness check is also recommended, minimum 30. Coating that has exceeded its maximum recoat time should be checked for styrene or acetone sensitivity or uniformly scarified to assure secondary bonding. Consult Tnemec Technical Services and Technical Bulletin 22-119 R1.
Volatile Organic Compounds
EPA Method 24
0.93 lbs/gallon (111 grams/litre)
Primers
Self-priming on steel or Series 1402, 1407. Note: For services above 180°F (82°C), do not use a primer.
Volume Solids
85.0 ± 2.0% (mixed). Series 1415 contains a reactive monomer and some loss will occur during application and cure. Actual solids by volume will vary depending upon temperature and air movement.
Finish
Semi-gloss
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep
Support Documents
APP GUIDE_Series 1415 Vinester_90-Mil Silica-Free Mortar.pdf APP GUIDE Series 1415 Vinester 60 Mil Broadcast Vinester Color Card APP GUIDE_Series 1415 Vinester_90-Mil Glass Mat Reinforced.pdf APP GUIDE_Series 1415 Vinester_125-Mil Silica-Free Mortar Reinforced.pdf APP GUIDE_Series 1415 Vinester_150-Mil Glass Roving Reinforced.pdf APP GUIDE_Series 1415 Vinester_150-Mil Glass Roving & Abrasion.pdf