Series 1220
HydroLine
Generic Type
Glass Flake Inorganic Hybrid Epoxy
Common Usage
A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and protection of steel and concrete surfaces in immersion service, including potable water and mild wastewater. Easy to apply and solvent-free, Series 1220 is an excellent choice for coating tanks, reservoirs, and basins.
Special Qualifications
Certified by NSF International in accordance with NSF/ANSI/CAN Std. 61 and the extraction requirements of NSF/ANSI/CAN 600. Series 1220 is qualified for use on tanks and reservoirs, pipes, fittings, valves, and pumps. Reference Tnemec's certified product listing at www.nsf.org for additional details.
Series 1220 conforms to AWWA C 210.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
HAPS
0 lbs/gallon solids
Number of Components
Two: Part A and Part B (two Part A to one Part B by volume.)
Volume Solids
65.0 ± 2.0% (mixed) †
Finish
Flat
Theoretical Coverage
1,043 mil sq ft/gal (25.6 m²/L at 25 microns). See APPLICATION for coverage rates. †
Topcoats
Series 73, 113, 114, 115, V115, 156, 157, 158, 180, 181, 971, 975, 1220, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1080•, 1081•, 1094, 1095, 1096. •An extended cure time is needed when topcoating with Series 1080 or 1081. Reference additional recoat times listed below the cure table. Note: More than one finish coat may be required to achieve a uniform and desired gloss level.
Volatile Organic Compounds
Unthinned; 0.02 lbs/gallon (2.0 grams/litre)
Thinned 5% with water: 0.02 lbs/gallon (2.0 grams/litre)
Thinned 10% with water: 0.02 lbs/gallon (2.0 grams/litre)
Curing Time
Temperature | To Touch | To Handle | To Recoat † | Immersion |
---|---|---|---|---|
95°F (35°C) | 30 minutes | 2 hours | 3 hours | 7 days |
75°F (24°C) | 1 hour | 6 hours | 8 hours | 7 days |
55°F (13°C) | 2 hours | 8 hours | 16 hours | 28 days |
45°F (7°C) | 3 hours | 10 hours | 24 hours | 28 days |
Curing time varies with surface temperature, air movement, humidity and film thickness. † The following minimum recoat times apply when topcoating with Series 1080 or 1081: 95°F (35°C) 12 hours, 75°F (24°C) and 55°F (13°C) 24 hours, 45°F (7°C) 4 days.
Recommended DFT
Standard: 4.0 to 10.0 mils (100 to 255 microns) per coat.
High-Build: 12.0 to 20.0 mils (305 to 510 microns).
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep