Series 118

Uni-Bond Mastic

Generic Type

Mastic Waterborne Acrylic

Common Usage

A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and corrosion resistance over minimally prepared aged coating systems. Series 118 is an excellent choice for projects where abrasive blast cleaning of the substrate is not possible and an anti-corrosive coating is needed. Uni-Bond Mastic accepts a variety of high-performance topcoats for the creation of a long-term protective and aesthetic coating system. Coating film can be reinforced and strengthened with a variety of mesh options when dictated by exposure conditions and service environments.

Special Qualifications

Series 118 meets the requirements of LEED-Low-Emitting Materials, Collaborative for High Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.

View more product details

Volatile Organic Compounds

Unthinned: 0.26 lbs/gallon (31 grams/litre) †

Number of Components

One

Primers

Steel: Self-priming or Series 1, 90-97, 91-H₂O, 94-H₂O, 394.

Recommended DFT

6.0 to 8.0 mils (150 to 205 microns) per coat. Note: Two coats are required over bare steel. Overcoating an aged system that is mostly intact and tightly adhered can be achieved by spot priming prior to applying a full coat.

Topcoats

Series 30, 72, 73, 700, V700, 701, V701, 740, 750, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075, 1075U, 1094, 1095 or 1096. Note: Series 118 is not intended to be a finish coat. A topcoat is strongly recommended for aesthetics and avoidance of dirt accumulation.

Finish

Matte

Theoretical Coverage

882 mil sq ft/gal (21.6 m²/L at 25 microns). See APPLICATION for coverage rates. †

Volume Solids

55.0 ± 2.0% †

Curing Time

Temperature To Touch To Handle To Recoat
75°F (24°C) 30 minutes 4 hours 8 hours

Curing time varies with surface temperature, air movement, humidity and film thickness.

HAPS

Unthinned: 0.02 lbs/gal solids

Still have questions? Request the information you’re looking for:

Request Info

How to Purchase

Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep

Continue Exploring in the color tool

Close

Color Swatch packet

You can use our Color Tool page to explore our available colors and request swatches of colors you like.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close