Series 114
H.B. Tneme-Tufcoat
This product has been discontinued. Please contact your local sales representative for further assistance.
Generic Type
Waterborne Acrylic Epoxy
Common Usage
High performance gloss coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.
Primers
Steel: Series 1, 10, 27, 37H, 66, N69, N69F, 90E-92, 90-97, H90-97, 115, 394, 530. Note: Series 10 and 37H are not recommended for frequently wet conditions. Allow Series 10 to cure one week and 37H to cure 30 days before topcoating. Note: When topcoating Series 1 or 394 with 114, maximum recoat time is three days.
Galvanized Steel and Non-Ferrous Metal: Series 66, N69, N69F, 115
Dense Concrete: Self-priming, Series 130, 218
CMU: Series 54, 130, 218
Drywall: Series 151
Wood: Dry interior environments only, self-priming, Series 10-99W, 151-1051
Recommended DFT
4.0 to 6.0 mils (100 to 150 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Finish
Gloss
Colors
Refer to Tnemec Color Guide.
Volume Solids
42.0 ± 2.0% (mixed) †
Theoretical Coverage
674 mil sq ft/gal (16.5 m²/L at 25 microns). See APPLICATION for coverage rates. †
Volatile Organic Compounds
Unthinned: 2.04 lbs/gallon (244 grams/litre)
Thinned 5% (No. 59 Thinner): 2.16 lbs/gallon (258 grams/litre) †
Curing Time
Temperature | To Touch | To Handle | To Recoat |
---|---|---|---|
75°F (24°C) | 30-45 minutes | 2-3 hours | 1-2 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
HAPS
Unthinned: 2.83 lbs/gal solids
Thinned 5% (No. 59 Thinner): 3.06 lbs/gal solids
Number of Components
Two: One Part A (4.5 gal) and One Part B (1/2 gal)