Series 1074
Endura-Shield II
Generic Type
Aliphatic Acrylic Polyurethane
Common Usage
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available; see Curing Time below. NOT FOR IMMERSION SERVICE.
Special Qualifications
Series 1074 meets the requirements of SSPC-36 (level 3) Paint Standard.
This product is part of a coating system tested in accordance with ISO 12944-6 (2018). Contact your Tnemec representative for coating system test results.
View more product detailsProduct Data Sheets
- English_Series_1074_Endura_Shield_Ii_pds.pdf
- French_Series_1074_Endura_Shield_Ii_pds.pdf
- Spanish_Series_1074_Endura_Shield_Ii_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 502 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Primers
Steel: Series 1, 20, FC20, 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, 91-H₂O, 94-H₂O, 104, 118, 135, L140, L140F, N140, N140F, V140, V140F, 161, 394, V530. Note: Series 118 is typically used to overcoat, sound, existing coating systems. See product data sheet for more information.
Galvanized Steel and Non-Ferrous Metal: Series 66, L69, N69, V69, 135, 1224. Note: For special galvanized surface preparation instructions, consult the latest version of Tnemec Technical Bulletin 10-78.
Concrete: Series 66, L69, L69F, N69, N69F, V69, V69F, 104, 161
CMU: 54, 130. Intermediate coat required.
Note: Before topcoating with Series 1074, Series V530 exterior exposed for more than 24 hours must first be scarified or receive an intermediate coat of Tnemec polyamide epoxy. Recoat windows for other primers may apply. See those data sheets for additional information.
Theoretical Coverage
1,051 mil sq ft/gal (25.8 m²/L at 25 microns). See APPLICATION for coverage rates. †
Curing Time
| Temperature | To Handle | To Recoat | Resist Moisture |
|---|---|---|---|
| 95°F (35°C) | 4 hours | 5 hours | 3 hours |
| 75°F (24°C) | 6 hours | 8 hours | 5 hours |
| 55°F (13°C) | 12 hours | 16 hours | 9 hours |
| 35°F (2°C) | 36 hours | 48 hours | 20 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness. If coating is exposed to moisture before the applicable cure parameters are met, dull, flat or spotty appearing areas may develop. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet. Contact Tnemec Technical Services for force curing times and temperatures.
Finish
Gloss
Volume Solids
66 ± 2.0% (mixed) †
Number of Components
Two: Part A and Part B
HAPS
| Unthinned | Max 10% No. 39 Thin.) | Max 9% No.42 Thin.) | Max 8% (No. 48 Thin.) |
|---|---|---|---|
| 0.0 lbs/gal solids | 0.0 lbs/gal solids | 0.0 lbs/gal solids | 0.0 lbs/gal solids |
Volatile Organic Compounds
EPA Method 24 †
| Unthinned|| Max 10%
(No. 39 Thin.) || Max 9%
(No. 42 Thin.) || Max 8%
(No. 48 Thin)|
|2.24 lbs/gal
(269 g/l) || 2.83 lbs/gal
(339 g/l) || 2.83 lbs/gal
(339 g/l) || 2.84 lbs/gal
(340 g/l) |
Recommended DFT
2.0 to 5.0 mils (50 to 125 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep