Series 104
H.S. Epoxy
Generic Type
Cycloaliphatic Amine Epoxy
Common Usage
Versatile coating applies up to 10 mils per coat on steel or concrete. Protects in immersion, salt spray and chemical exposures. Superior abrasion- and stain-resistance.
Special Qualifications
Conforms to the performance requirements of AWWA C 210 (not for potable water contact).
View more product detailsProduct Data Sheets
- English_Series_104_Hs_Epoxy_pds.pdf
- French_Series_104_Hs_Epoxy_pds.pdf
- Spanish_Series_104_Hs_Epoxy_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 503 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Volatile Organic Compounds
EPA Method 24 †
Unthinned: 0.80 lbs/gallon (96 grams/litre)
Thinned 10% (No. 2 Thinner): 1.92 lbs/gallon (230 grams/litre)
Thinned 10% (No. 49 Thinner): 0.80 lbs/gallon (96 grams/litre)
Curing Time
Temperature | To Handle | To Recoat | Immersion |
---|---|---|---|
75°F (24°C) | 6 hours at 4.0 mils 100 microns) DF 0 hours at 10.0 mils 255 microns) DFT | 16-18 hours | 7 days |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Number of Components
Two: Part A (amine) and Part B (epoxy)
Primers
Steel: Self-priming or Series 66, L69, L69F, N69, N69F, V69, V69F, 90E-92, 90-97, 90G-1K97, 161
Concrete: Self-priming or Series 215, 218.
CMU: Self-priming or Series 130, 215, 218
Topcoats
Series 66, L69, L69F, N69, N69F, V69, V69F, 73, 104, 1074, 1074U, 1075, 1075U
Refer to COLORS on applicable topcoat data sheets for additional information. Note: When topcoating with Endura-Shield polyurethane finish, exterior exposed Series 104 has the following maximum time to recoat: Series 73, 1074, 1074U, 1075 or 1075U, 60 days. If this time is exceeded, an epoxy intermediate coat or scarification is required before topcoating. Refer to appropriate topcoat data sheet for additional information.
Finish
Semi-gloss. Gloss can vary with texture, porosity of substrate and thickness of film.
Recommended DFT
4.0 to 10.0 mils (100 to 255 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
HAPS
Unthinned: 1.60 lbs/gal solids
Thinned 10% (No. 2 Thinner): 2.50 lbs/gal solids
Thinned 10% (No. 49 Thinner): 1.60 lbs/gal solids
Theoretical Coverage
1,315 mil sq ft/gal (32.3 m²/L at 25 microns). See APPLICATION for coverage rates. †
Volume Solids
82.0 ± 2.0% (mixed) †
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep