Series 1028T
Enduratone
This product has been discontinued. Please contact your local sales representative for further assistance.
Generic Type
HDP Acrylic Polymer
Common Usage
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. Contains ceramic spheres for enhanced thermal stability. May be applied by spray, brush or roller over Aerolon insulative coating systems. It is mildew resistant and exhibits very good gloss and color stability.
Volume Solids
46.0 ± 2.0% †
Intermediate
Series 971
Finish
Gloss - Note: Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Colors
Refer to Tnemec Color Guide. Note: Certain colors may require multiple coats depending on method of application and finish coat color.
Number of Components
One
Volatile Organic Compounds
Unthinned: 0.61 lbs/gallon (73 grams/litre)
Thinned 5%: 0.61 lbs/gallon (73 grams/litre) †
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat. Important: Do not exceed 3 mils DFT when topcoating Aerolon for personnel protection.
HAPS
Unthinned: 0.27 lbs/gal solids
Thinned 5%: 0.27 lbs/gal solids
Theoretical Coverage
738 mil sq ft/gal (18.1 m²/L at 25 microns). See APPLICATION for coverage rates. †
Curing Time
| Temperature | To Touch | To Handle | To Recoat | To Resist Moisture |
|---|---|---|---|---|
| 75°F (24°C) | 30 minutes | 2 hours | 2 hours | 6 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.