Series 10
Tnemec Primers
This product has been discontinued. Please refer to Series V10 | Tnemec Primers for a suitable alternative, or contact your local sales representative for further assistance.
Generic Type
Modified Alkyd
Common Usage
Chemically active, rust-inhibitive primer for ferrous metals. Provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as a primer for wood substrates.
Number of Components
One
Volatile Organic Compounds
Unthinned: 2.98 lbs/gallon (357 grams/litre)
Thinned 10%: 3.30 lbs/gallon (395 grams/litre) †
Volume Solids
56.0 ± 2.0% †
HAPS
Unthinned: 0 lbs/gal solids
Thinned 10%: 0 lbs/gal solids
Curing Time
Temperature | To Handle | To Recoat | |
---|---|---|---|
99, 99 9G, 1009 | 75°F (24°C) | 2-4 hours | 12 hours |
99W | 75°F (24°C) | 3-5 hours | 12 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Recommended DFT
2.0 to 3.5 mils (50 to 90 microns) per coat.
Colors
99 Red, 1009 Gray, 99G Green, 99B Black, 99W White. Note: Minimum order quantities apply for 99G Green and 99B Black.
Theoretical Coverage
898 mil sq ft/gal (22.0 m²/L at 25 microns). See APPLICATION for coverage rates. †
Topcoats
Series 2H, 2HS, 6, 30, 82HS, 113, 114, 115, 1028, 1029. Note: Some systems are not for use on surfaces that are continually wet or sweat frequently. Reference the applicable topcoat data sheet for additional information.
Note: Series 10 and V10 must cure three days before topcoating with Series 1028 or 1029.
Note: For field touch-up and VOC restricted areas, use Series V10.